Search results

Call or Quote to place an order

High capacity 7.4V 2500mAh battery
Provides long-lasting power for your instrument
Sturdy, lightweight design for easy portability
For use with Topcon FC-2500, FC-250, FC-200, FC-120, GRS-1 or Sokkia SCH2500, SCH250

Compatible with Topcon GM, GT, OS & ES series total stations
Also fits Sokkia CX and FX series total stations
7.2V 5986mAh

Multi-frequency operation: Locate a wide variety of buried utilities with 512 Hz, 33 kHz, and 82 kHz frequencies, plus 50/60 Hz passive and 512 Hz sonde detection.
Ultralight and compact design: The REX is easy to carry and use, with a retractable receiver and a slim, lightweight transmitter.
Automatic and manual output power: The REX automatically delivers the optimal amount of power to the load, but you can also manually adjust the power as needed.
Rugged construction: The REX is built to withstand the harsh conditions of fieldwork.

Multi-frequency operation: Locate a wide variety of buried utilities with 33 kHz and 82 kHz frequencies, plus passive power locating capabilities. The u-LOCATE Plus model also has a sonde mode (512 Hz).
Lightweight and ergonomic design: The u-LOCATE is easy to carry and use, with a retractable receiver and a slim, lightweight transmitter.
Automatic and manual output power: The u-LOCATE automatically delivers the optimal amount of power to the load, but you can also manually adjust the power as needed.
Rugged construction: The u-LOCATE is built to withstand the harsh conditions of fieldwork.
High contrast screen: Provides clarity even in bright sunlight.

Multi-frequency operation allows the u-Locate+ to locate a wide variety of buried utilities, including metal pipes, cables, and non-metallic pipes.
Sonde mode is useful for locating utilities that are difficult to reach or that are buried in deep soil.
Directional indication shows the operator the direction of the buried utility, making it easy to track down and avoid damaging it.
Depth estimation is helpful for planning excavations and repairs.
Automatic and manual power control optimizes the signal for the best possible results.
Rugged construction ensures that the u-Locate+ can withstand the harsh conditions of fieldwork.

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Topcon users with 77 mm prism
Weighs 0.14 lb (0.06 kg)

New reduced length to make it easier to fit in pipes around tighter inverts
Self levelling range of -12% to +40% over the entire grade range
Cross axis compensation provides a quicker more accurate set-up as the laser does not have to be level in the pipe - place it in the pipe it levels, you work
Bright visible beam that works up to 150m (500ft)
RC803 remote works via radio 130m (430ft) or infra-red 150m (500ft) for both "over-the-top" set-up and in pipe/trench set-up.
Large, bright, graphical user interface makes the screen easier to see and use when in or out of the pipe. Same graphical user interface can be seen on the remote - what you see on the laser you see on the remote.

Call or Quote to place an order

Input voltage: 100-240V
Output voltage: DC8.28V, 1.2Ax2
Compatible with Topcon BDC71 & BDC72 batteries

Case, Remote, & Rechargeable Battery Included
Up To 100hr Battery Life
Range Up To 3600ft w/ Receiver
Accuracy of ±7 Arc Seconds
Auto-Leveling Within ±5 Degrees
Rotating Speed of Either  300/600/900 RPM
IP66

Operating range up to 656 feet
Optional Alignmaster function
Grade range: -10% to 25%
Self-leveling -15% to 30%
Range up to 500 feet range
Accuracy: ±10 arc seconds
Automatic grade compensation
IPX8 water resistant

Tilting pivot allows measurement on sloped or flat pipe surfaces
Standard topo shoe length, 3.375-inch (85.7-mm), compatible with all SECO Poles
2-inch (50.8-mm) diameter chrome-plated steel housing with grade-8 ceramic magnet ring
Magnet has 40 pounds of pull force on 3/8-inch (9.5-mm) clean steel plate
Black anodized machined 6061 aluminum body
Machined brass pole connecter with female 5/8 x 11 threads
Weighs 0.55 lb (0.25 kg)

The TopoBoot®, made of black nylon, screws over the precision point and increases the area of the point for use on soft surfaces in topo shots
The Topo-Boot is removable and stores conveniently under the large, easy-to read vial
Weighs 0.05 lb (0.02 kg)

3.37 inch (85.6 mm) aluminum body
Weighs 0.34 lb (0.15 kg

Induces a current on a pipe or cable for tracing purposes
An optional accessory that works with the Schonstedt REX pipe and cable locator
Easy to use
Compatible with a variety of Schonstedt products
2-inch and 5-inch sizes available
Durable construction
Weatherproof

3.37 inch (85.6 mm) in Length
2.5 inch (64 mm) Outside Diameter
Steel body
Weighs 1.26 lb (0.57 kg)

Locatable to 19 feet
3-section sonde
Measures 0.9 inches by 18.8 inches
Designed for improved flexibility around pipe and duct corners
Can be used with a variety of Radiodetection locators
Compatible with both ferrous and non-ferrous pipes

Two-in-one kit includes a Rex multi-frequency pipe and cable locator and a GA-92XTd magnetic locator.
Rex locator features multiple frequencies to locate a wide variety of buried utilities, including metal pipes, cables, and non-metallic pipes.
GA-92XTd magnetic locator is ideal for locating ferrous objects, such as manhole covers and valve boxes.
Both locators are rugged and durable, making them ideal for field use.

Can be used to trace pipes and ducts as small as 0.5 inches in diameter
Can be used to map the path of a pipe or duct without digging or drilling
Flexible design allows it to navigate tight bends and corners
Durable construction can withstand the rigors of everyday use
Easy to use and operate

Traces the path of or locates blockages in metallic, non-metallic pipes or conduit
Traces empty fiber-duct or adjacent conduit runs
Stops at unmarked underground vaults or splice boxes
Watertight transmitter
Maneuvers through 90° turns in 1.5" inch (38 mm) pipe
Can be used to locate buried utilities
6-month manufacture warranty

Roller-type model with 6-digit pulse count for cumulative measurements up to 10m-100 times the capacity of ordinary planimeters
Enhanced with micro-processors for precise and accurate measurements, ideal for civil engineering, surveying, and more
Features hold and measuring control, clear digital readout, and scale readings in Metric or English
Easy roller operation, simply follow the outline of the area to be measured
Max measuring range of 325mm vertical and 30m horizontal with accuracy within ±0.2%
Comes with a plastic carrying case, AC adapter (battery included), and operating instructions
Includes a 1-year warranty from the manufacturer.