Koizumi Placom KP-82N Digital Planimeter
  • Koizumi Placom KP-82N Digital Planimeter
  • Koizumi Placom KP-82N Digital Planimeter

Koizumi Placom KP-82N Digital Planimeter

$705.00

Sold but can reorder Koizumi Placom KP-82N Digital Planimeter. Polar Planimeter without scale entry.

Quantity

  • Security policy (edit with Customer reassurance module) Security policy (edit with Customer reassurance module)
  • Delivery policy (edit with Customer reassurance module) Delivery policy (edit with Customer reassurance module)
  • Return policy (edit with Customer reassurance module) Return policy (edit with Customer reassurance module)
Type Polar Type, Single Function
Display 6Symbols, Liquid Crystal, 8-digit Figures
Symbol Batt-E,SCALE
MEMO,HOLD
cm2,in2,etc.
Converting Function Unit(in2,cm2)
Accumulated
Measuring Value
Maximum 10m2(Scale 1:1)
Measuring Range Maximum, with the pole put outside the pattern: 300mm in diameter
Maximum, with the pole put inside the pattern: 800mm in diameter
Accuracy Within +/-0.2%(Within +/-2/1000pluses)
Power Supply Built-in Ni-MH Battery(rechargeable through AC Adapter)
AC Adapter 100-240V (Auto-power-off function is provided.)
Operating Duration Approx. 30 hours of continuous operation

Measurement by 6 dlglt pulse countThis N-Series can measure the area by pulse count of 6-digits. This method enables a larger cumulative measurement of area (Up to 1Om2)Maximum cumulative measurement value of 10m2NWith the measurement by 6-digit pulse count, the N-Series Planimeter can measure a larger area by 100 times than ordinary Planimeter. The conventional planimeter has a maximum cumulative area to measure only 0.1m2. If measurement value shows over 0.1m2 when measuring, the display is to be reset to "O". This requires to register the numbers of how many times these resettings are occurred. With the New PLACOM N-Series, there is no need of these troublesome procedures.Easy conversion function of unit and scaleKKP-90N and KP-80N can convert easily the measured area value into a new area value in a newly desired unit and with a newly desired scale value. KP-92N and KP-82N can convert the unit between in2 and cm2Hold memory functionIn cumulative measurement, this Hold Memory function is effectively used. If an error occurs in measuring, press C/AC key. Then last measured value is appeared by pulse oount. Since previous measured values before error are stored, there is no need to another measurements from the beginning.Automatic shifting of unit to upper unitWhen the measured area value overtlows the displayed figures of 8 digits, the measured area value is calculated and displayed by an upper unit. When the overflows is occurred in the uppermost unit, km2, acre, the measurement can be continued by pulse count display.Average value measurementIn order to get better result of measurement, Mean value measurement is recommended. This measurement can be easily done on this N-Series.Measurement of an area with different lateral and longitudinal Scale.Auto-power-off function for energy saving